bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Salt Spreaders


  • How Replacement Spreader Controller for SnowEx Salt Spreader Wires To Salt Spreader
  • The Replacement Spreader Controller for SnowEx Salt Spreader part # 3379032020 is a replacement spreader controller for Snow Ex salt spreaders SP325/575/1075. The salt spreader should have came with a harness to wire the controller to the battery. I have attached a diagram of how the controller is wired
    view full answer...

  • Timbren Rear Suspension For 2019 Ram 1500 With Salt Spreader
  • The Timbren Rear Suspension Enhancement that you need for the 2019 Ram 1500 with a salt spreader is part # TDRTT1500. These Timbren Springs are designed for service trucks like your truck with the salt spreader. They have a 7,000 lb capacity and will help to level out the load to reduce rear sag from the heavy salt spreader. I have attached an installation video for your reference.
    view full answer...

  • Can Salt Spreader be Installed on a Compact Tractor
  • The salt spreaders that we have are designed to either fit into the back of a truck or into a hitch receiver. If you're able to install a 2" receiver on your tractor, like the Gen-Y Weld-On 2" Receiver Tube # 325-GH-003, then you'll be able to use a salt spreader like the SaltDogg Electric Hitch-Mount Salt Spreader # 337TGSUV1B.
    view full answer...

  • Will the SaltDogg Electric Hitch-Mount Salt Spreader Work with Sand
  • The SaltDogg Electric Hitch-Mount Salt Spreader part # 337TGSUV1B won't work with sand but we do have an option that will work with a salt/sand mix, the SaltDogg Electric Tailgate Salt Spreader part # 337TGS07 but it does however require a pickup.
    view full answer...

  • Will the SaltDogg Electric Hitch-Mount Salt Spreader Work w/ Sand?
  • I have a solution for you but the SaltDogg Electric Hitch-Mount Salt Spreader item # 337TGSUV1B can only be used with dry-bagged #1 free-flowing rock salt or refined sodium chloride. I verified this information with the manufacturer. The weight of the sand compared to the weight of the salt is the limiting issue. If you use sand and have a failure your warranty will be voided. The SaltDogg Electric Hitch-Mount Salt Spreader item # 337TGSUV1B can be mounted to both 1-1/4" and 2" hitches....
    view full answer...

  • Does Replacement Electric Throttle Motor for Salt Spreader w/ Briggs Engine Allow RPM Adjustments
  • The Replacement Electric Throttle Motor for Salt Spreader w/ Briggs and Stratton Engine # 3371410713 does allow you to change the RPM like you are interested in. That's what the lever on it is for.
    view full answer...

  • Recommended Stability Plus Stabilizer Springs for a 2012 Ford F-250 4WD
  • There is a set of Stability Plus Stabilizer Springs that will work with your 2012 Ford F-250 4WD and it will definitely help with your sagging. You will want item # SPS94FR. These stabilizers have a 1,500 lbs capacity. The Stability Plus Stabilizer Springs item # SPS34FR you were looking at, do fit your truck but only have a 900 lbs capacity. If your salt spreader and water tank are going to be over 1,500 lbs, I recommend using the SuperSprings Custom Suspension Stabilizer and Sway Control...
    view full answer...

  • Fit of Timbren T94VR Helper Springs on 2020 Ram 3500 Cab/Chassis
  • The Timbren # T94VR is a fit for 2WD and 4WD models of the 2020 Ram 3500 Cab/Chassis, as confirmed by Timbren. This system is ideal for heavy duty applications like tow trucks or trucks that carry slide-in campers or salt spreaders. If you click the provided link, you can see a product demonstration video.
    view full answer...

  • Timbren Suspension Enhancement For a 2000 Chevrolet K2500 Classic 4x4 Pickup
  • Yes, the Timbren # TGMFK25S front springs will fit your 2000 Chevrolet K2500 pickup. The K-series trucks were the classic version while the 2500 began the new Silverado series of pickups. If you are looking for similar rear springs we have their Severe Service # TGMRCK35MA or Standard # TGMRCK25 springs. The severe service are best for applications which always have additional weight such as trucks with a salt spreader, camper or truck bed box.
    view full answer...

  • Can Timbren 1 Inch Spacers Be Used with TFRTT350J Severe Service Helper Springs
  • The 1 inch # A25723-90AH00 spacer would be compatible with the Timbren Aeon Spring you asked about. The Timbren # TFRTT350J is intended for severe duty applications such as trucks with slide-in campers, rear-mounted salt spreaders, tow trucks or trucks with a bed mounted boom or cherry picker. If you'd install that on a regular pickup that doesn't use those accessories, you'll have a pretty harsh ride. If that's the case, you'd want to use # TFR350SDJ instead, which is also compatible...
    view full answer...

  • Can Timbren Rear Suspension Enhancements Be Used Weight Distribution on 2018 F-150
  • Yes, Timbren suspension enhancement can be used along with a weight distribution hitch. However, you would not want to use the # TFRTT1504E. This is a severe service kit that is better suited for something like a slide-in camper or salt spreader. The # TFR1504E is the correct spring for your 2018 F-150. The Timbren will provide extra support, but if ride quality is something you're concerned with I would go with the SumoSprings # SSR-117-47. The 1,500 lb weight capacity should be more...
    view full answer...

  • Timbren Suspension Enhancement System for a 2021 GMC Sierra 1500 AT4
  • The Timbren Suspension Enhancement System item # T53MR includes a 1" spacer that is optional for install. The suspension enhancement system should have a 1/2" to 1-1/2" gap between the rubber spring and contact point of your 2021 GMC Sierra 1500 AT4 when empty. A partial load, or other accessories will reduce or eliminate the gap. The overall height of this system is 5 3/4" so you if have larger than a 1-1/2" gap you will need to add the Timbren 1" Spacer item # TA25723-90AD00 or the 1/2"...
    view full answer...

  • Compatibility Of Timbren Suspension Enhancement With a Weight Distribution Hitch
  • Yes, you will be able to use Timbren suspension enhancement on your 2019 Ford F-250 with a weight distribution hitch. I see you are looking at the System # TFRTT350J which is their severe duty kit. This is best used on vehicles which will always have additional weight like ones with a service bed, salt spreader or always towing. If you are not always towing or have a large load in your truck the Kit # TFR250SDJ will be a better option, This will give you a better ride quality then the severe...
    view full answer...

  • Choosing the Correct Timbren Suspension System For a 2019 Ford F-250 Super Duty
  • With towing a 12,000lb trailer with your 2019 Ford F-250 the Timbren Suspension Enhancement System # TFRTT350J is the better choice. Your trailer will likely only add 1,200-1,800lbs of tongue weight to your truck. So you will only be using the Timbren to help reduce rear end sag from the trailer. The Timbren # TFR250SDJ is their severe service springs. These are designed for trucks that always have a large amount of weight added to their bed. Generally used with slide in campers, tool...
    view full answer...

  • Best Timbren Suspension Enhancement For 2023 Ford F-350 Super Duty
  • There are two Timbren systems for your 2023 Ford F-350, like you said, with the best definitely being the following part number: - Timbren Suspension Enhancement System # TFR350SDJ The reason for that is the # TFR350SDJ is designed for standard pickups while the other kit, part # TFRTT350J, is designed for service vehicles like a salt spreader, for example. The differences is that the # TFR350SDJ is double convoluted, which just means its shape is designed to compress more, giving you...
    view full answer...

  • Correct Timbren Jounce Bumper Kit for a 2018 Ram 1500 4x4
  • There are actually a few subtle differences in each Timbren kit so I'll just highlight those and you can choose which one best matches what you have on your 2018 Ram 1500 4x4: - 6,000 lb part # TDR1500DS - Fits Regular Cab models without factory air suspension - 7,000 lb part # TDRTT1500 - Designed for severe service vehicles (slide-in camper or salt spreader-type applications) - 8,600 lb part # TDR1500DQ - Non-Regular Cab models without factory air suspension Hopefully this helps...
    view full answer...

  • Recommended SuperSpring Suspension Enhancement For A 2019 Ford F-250
  • The capacity of the suspension enhancement you install will not increase or replace the capacity that your vehicle currently has. These enhancements are really just to help support your truck's suspension and reduce sag so to improve your ride quality and reduce sag. SuperSprings are essentially just adding on a extra leaf to the spring stack to help stiffen your leaf springs and reduce the flex when a heavy load is placed on them. The capacity of the spring can vary from model to model...
    view full answer...